Description
Functions
Kit comprising a corner drive and an adjustable striker for use whenever additional fastening mechanisms are required on the casement.
Related products
-
Sash hinge set for CHIC 3D 100 RX
$279.90Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.Sash hinge set for CHIC 3D 100 RX
Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.$279.90 -
Flash base hinge
$42.00Technical Details Supplied preassembled to enable fast installation and faultless positioning of the hinge on already assembled fixtures. Special fixing plates, preassembled with the hinge bodies (Giesse RAPID system), enable fast installation and faultless positioning of the hinge on already assembled fixtures. The FLASH BASE hinge is fitted extremely quickly to the sash and frame, […]Flash base hinge
Technical Details Supplied preassembled to enable fast installation and faultless positioning of the hinge on already assembled fixtures. Special fixing plates, preassembled with the hinge bodies (Giesse RAPID system), enable fast installation and faultless positioning of the hinge on already assembled fixtures. The FLASH BASE hinge is fitted extremely quickly to the sash and frame, […]$42.00 -
Chic – T/T kit arm T1 RX
$298.80Set of hinges (top and bottom), completely pre-assembled and ready to be installed on the profile.Chic – T/T kit arm T1 RX
Set of hinges (top and bottom), completely pre-assembled and ready to be installed on the profile.$298.80 -
FUTURA TILT/TURN HINGE 130
$155.60Functions
Futura 3D 130 tilt-and-turn hinge set (upper and lower).Technical Features
Hinges: hinge set (upper and lower), completely pre-assembled and ready to be installed on the profile.Materials
Hinges:
• Body of hinges in extruded aluminum and brass • Supports in zamak with GS Silver Plus finish (up to 500 h corrosion resistance) • Pins, screws and grub screws in stainless steel Finishes:- Ral 9005
- Ral 9016
- Ral 9006
FUTURA TILT/TURN HINGE 130
Functions
Futura 3D 130 tilt-and-turn hinge set (upper and lower).Technical Features
Hinges: hinge set (upper and lower), completely pre-assembled and ready to be installed on the profile.Materials
Hinges:
• Body of hinges in extruded aluminum and brass • Supports in zamak with GS Silver Plus finish (up to 500 h corrosion resistance) • Pins, screws and grub screws in stainless steel Finishes:- Ral 9005
- Ral 9016
- Ral 9006
$155.60 -
Giesse Futura Additional Arm T/T
$78.50Technical Details
The additional arm is fitted to the cross-beam on opposite side to the arm (drive side) on sashes more than 1000 mm wide to prevent excessive leverage, which might impair operation of the window, during bottom-hung opening. The arm consists of a component for connection to the corner driver without fixing screws, a rod and a slider which is fixed to the frame using three self-tapping screws provided. The element and its slider only come into operation when the cremone is placed in the bottom-hung position. It is only in this case that the pin on the rod fixed to the driver is inserted in the slider on the frame. Then, when the sash is opened in bottom-hung mode, the sash pin will slide into the slider, preventing the sash from opening too far, and offloading some of the weight not only on the type 2 arm but also on the additional arm.Functions
Additional arm for combination with the type 2 arm on casements more than 1000 mm wide, installed to distribute the sash opening force during bottom-hung opening.Materials
Stainless steel arm Slider and fixing plug in GS SILVER PLUS zamak Polyamide shim Screws and grub screws in stainless steelGiesse Futura Additional Arm T/T
Technical Details
The additional arm is fitted to the cross-beam on opposite side to the arm (drive side) on sashes more than 1000 mm wide to prevent excessive leverage, which might impair operation of the window, during bottom-hung opening. The arm consists of a component for connection to the corner driver without fixing screws, a rod and a slider which is fixed to the frame using three self-tapping screws provided. The element and its slider only come into operation when the cremone is placed in the bottom-hung position. It is only in this case that the pin on the rod fixed to the driver is inserted in the slider on the frame. Then, when the sash is opened in bottom-hung mode, the sash pin will slide into the slider, preventing the sash from opening too far, and offloading some of the weight not only on the type 2 arm but also on the additional arm.Functions
Additional arm for combination with the type 2 arm on casements more than 1000 mm wide, installed to distribute the sash opening force during bottom-hung opening.Materials
Stainless steel arm Slider and fixing plug in GS SILVER PLUS zamak Polyamide shim Screws and grub screws in stainless steel$78.50
