-
FUTURA TILT/TURN HINGE 130
$155.60Functions
Futura 3D 130 tilt-and-turn hinge set (upper and lower).Technical Features
Hinges: hinge set (upper and lower), completely pre-assembled and ready to be installed on the profile.Materials
Hinges:
• Body of hinges in extruded aluminum and brass • Supports in zamak with GS Silver Plus finish (up to 500 h corrosion resistance) • Pins, screws and grub screws in stainless steel Finishes:- Ral 9005
- Ral 9016
- Ral 9006
FUTURA TILT/TURN HINGE 130
Functions
Futura 3D 130 tilt-and-turn hinge set (upper and lower).Technical Features
Hinges: hinge set (upper and lower), completely pre-assembled and ready to be installed on the profile.Materials
Hinges:
• Body of hinges in extruded aluminum and brass • Supports in zamak with GS Silver Plus finish (up to 500 h corrosion resistance) • Pins, screws and grub screws in stainless steel Finishes:- Ral 9005
- Ral 9016
- Ral 9006
$155.60 -
Futura Top Rear Corner Transmission
$183.30Kit comprising a corner drive and an adjustable striker for use whenever additional fastening mechanisms are required on the casement.Futura Top Rear Corner Transmission
Kit comprising a corner drive and an adjustable striker for use whenever additional fastening mechanisms are required on the casement.$183.30 -
G-U Dirigent Series Interior Exterior Turn Handle
$82.20 – $88.20DIRIGENT turn handles are bound to impress with their bold shape and clean lines. Elegance and functionality are the main design features of the DIRIGENT design.G-U Dirigent Series Interior Exterior Turn Handle
DIRIGENT turn handles are bound to impress with their bold shape and clean lines. Elegance and functionality are the main design features of the DIRIGENT design.$82.20 – $88.20 -
Giesse Adaptor Combined Wing Futura 3D 130
$49.50Functions
FUTURA 3D 80 ALUMINIUM-WOOD features specific hinges for the secondary sash, with the same styling line and the same adjustments.Giesse Adaptor Combined Wing Futura 3D 130
Functions
FUTURA 3D 80 ALUMINIUM-WOOD features specific hinges for the secondary sash, with the same styling line and the same adjustments.$49.50 -
Giesse Corner Drive EG Channel 15/20 Futura
$122.30The additional fasteners make it possible to add further fastening elements that either increase the dimensions of the casement or that can be used when locking points are needed on the cross beams or hinge-side upright. On the basis of the dimensions of the casement, additional fasteners (for H>1200 mm and W>1000 mm) and the additional arm (which is mandatory for W>1000 mm) are to be used in combination with this mechanism.Giesse Corner Drive EG Channel 15/20 Futura
The additional fasteners make it possible to add further fastening elements that either increase the dimensions of the casement or that can be used when locking points are needed on the cross beams or hinge-side upright. On the basis of the dimensions of the casement, additional fasteners (for H>1200 mm and W>1000 mm) and the additional arm (which is mandatory for W>1000 mm) are to be used in combination with this mechanism.$122.30 -
Giesse Futura Additional Arm T/T
$78.50Technical Details
The additional arm is fitted to the cross-beam on opposite side to the arm (drive side) on sashes more than 1000 mm wide to prevent excessive leverage, which might impair operation of the window, during bottom-hung opening. The arm consists of a component for connection to the corner driver without fixing screws, a rod and a slider which is fixed to the frame using three self-tapping screws provided. The element and its slider only come into operation when the cremone is placed in the bottom-hung position. It is only in this case that the pin on the rod fixed to the driver is inserted in the slider on the frame. Then, when the sash is opened in bottom-hung mode, the sash pin will slide into the slider, preventing the sash from opening too far, and offloading some of the weight not only on the type 2 arm but also on the additional arm.Functions
Additional arm for combination with the type 2 arm on casements more than 1000 mm wide, installed to distribute the sash opening force during bottom-hung opening.Materials
Stainless steel arm Slider and fixing plug in GS SILVER PLUS zamak Polyamide shim Screws and grub screws in stainless steelGiesse Futura Additional Arm T/T
Technical Details
The additional arm is fitted to the cross-beam on opposite side to the arm (drive side) on sashes more than 1000 mm wide to prevent excessive leverage, which might impair operation of the window, during bottom-hung opening. The arm consists of a component for connection to the corner driver without fixing screws, a rod and a slider which is fixed to the frame using three self-tapping screws provided. The element and its slider only come into operation when the cremone is placed in the bottom-hung position. It is only in this case that the pin on the rod fixed to the driver is inserted in the slider on the frame. Then, when the sash is opened in bottom-hung mode, the sash pin will slide into the slider, preventing the sash from opening too far, and offloading some of the weight not only on the type 2 arm but also on the additional arm.Functions
Additional arm for combination with the type 2 arm on casements more than 1000 mm wide, installed to distribute the sash opening force during bottom-hung opening.Materials
Stainless steel arm Slider and fixing plug in GS SILVER PLUS zamak Polyamide shim Screws and grub screws in stainless steel$78.50 -
Giesse Internal Opening Kit Unica System
$32.50Technical Features
Completion kit that, in combination with the Unica mechanism, enables creating a finished cremone (sash, tilt-and-turn window, etc.). Composed of the internal components and any fixing components (screws and plate), it must be suitably mounted by the window maker.After the assembly phase the cremone is ready to be installed.The method of assembly of the kit is adequately explained in the fitting instructions.Materials
- Black polyamide plate (zinc plated steel for tilt-and-turn window version)
- Sliders and Racks in zinc plated die-cast zamak
- Stainless steel screws and fixing plate
Giesse Internal Opening Kit Unica System
Technical Features
Completion kit that, in combination with the Unica mechanism, enables creating a finished cremone (sash, tilt-and-turn window, etc.). Composed of the internal components and any fixing components (screws and plate), it must be suitably mounted by the window maker.After the assembly phase the cremone is ready to be installed.The method of assembly of the kit is adequately explained in the fitting instructions.Materials
- Black polyamide plate (zinc plated steel for tilt-and-turn window version)
- Sliders and Racks in zinc plated die-cast zamak
- Stainless steel screws and fixing plate
$32.50 -
Pair of project-out window arms – 3250A
$199.90Pair of project-out window arms - 14 inches (mm 355) lenghtPair of project-out window arms – 3250A
Pair of project-out window arms - 14 inches (mm 355) lenght$199.90 -
Prima Cremone
$66.50Reversible cremone handle for operating the GIESSE Sash, Tilt-and-Turn Window and Tilt-and-Turn Window with Microventilation mechanisms.Prima Cremone
Reversible cremone handle for operating the GIESSE Sash, Tilt-and-Turn Window and Tilt-and-Turn Window with Microventilation mechanisms.$66.50 -
Sash hinge set for CHIC 3D 100 LX
$279.90043542
Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.Functions
Set of hinges (top and bottom) for side-hung or secondary sash with tilt-and-turn CHIC 3D 100.Capacity
Up to 100 kg.Materials
Corner support made of zamak Connecting brackets and hinge plates made of zinc plated steel Pins made of 304 grade stainless steel and aluminium bronze Cams made of zinc plated steel.TECHNICAL SPECIFICATION
Cross-section type C001-C002-C003-C004-C005-C006 Hand LX Sash hinge set for CHIC 3D 100 LX
043542
Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.Functions
Set of hinges (top and bottom) for side-hung or secondary sash with tilt-and-turn CHIC 3D 100.Capacity
Up to 100 kg.Materials
Corner support made of zamak Connecting brackets and hinge plates made of zinc plated steel Pins made of 304 grade stainless steel and aluminium bronze Cams made of zinc plated steel.TECHNICAL SPECIFICATION
Cross-section type C001-C002-C003-C004-C005-C006 Hand LX $279.90 -
Sash hinge set for CHIC 3D 100 RX
$279.90Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.Sash hinge set for CHIC 3D 100 RX
Technical Details
Sash opening to 180°. Maximum load capacity 100 kg. Assembly is simple, fast and easy using the special pre-assembled cams. When there is an additional fastening mechanism, you need to use the CHIC fastening element. Both hinges are adjustable (3D). If opening is obstructed, you need to use the FRIZ limitation arm. CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.$279.90 -
Savio Arm Stay For Top Hung Openings
$77.801307.8 – Pair of adjustable two-position arms (LH+RH) for top hung casement opening out, with open position stop device, in stainless steel 316. Suitable for profiles with clearance of 16,5 mm. Technical instructionsSavio Arm Stay For Top Hung Openings
1307.8 – Pair of adjustable two-position arms (LH+RH) for top hung casement opening out, with open position stop device, in stainless steel 316. Suitable for profiles with clearance of 16,5 mm. Technical instructions$77.80 -
SKG – Tilt and Turn window kit
$321.40Tilt-and-Turn fastening mechanism available in standard version.SKG – Tilt and Turn window kit
Tilt-and-Turn fastening mechanism available in standard version.$321.40 -
Window Handle Verona
HOPPE aluminium turn/tilt window handle with Secustik® and VarioFit®.$74.90
